Fond GRC D.EXT 700 EP.3mm Dép. 316 l NFE81102
  • Fond GRC D.EXT 700 EP.3mm Dép. 316 l NFE81102
  • Fond GRC D.EXT 700 EP.3mm Dép. 316 l NFE81102
  • Fond GRC D.EXT 700 EP.3mm Dép. 316 l NFE81102
  • Fond GRC D.EXT 700 EP.3mm Dép. 316 l NFE81102

DIN28011- 316L- 700mm diameter 3mm thick

€386.78
Tax excluded

316L stainless steel Dished head 700 mm diameter

Torispherical (klopper) head in 316L stainless steel, in compliance with DIN28011 standard.

These heads can be used for stainless steel tank manufacturing.

All dimensions are in millimeters.

Quantity

 

Payment secured

 

Fast delivery

 

decreasing prices

You might also like

  •  Ref : VRS6L700X3
  • 316 L - 1.4404
VIROLE TEST
Starting from €488.04 HT

Features of stainless steel dished ends

This 316L stainless steel end is manufactured in accordance with DIN28011.

The dish radius is 700mm. 

The knuckle radius is 70mm.

The straight flange height is 25mm.

Torispherical end forming processes

Dished heads are manufactured by cold processes, spinning or press-forming.

All our dished stainless steel are supplied without grease. No heat treatment is performed after forming.

This dished head is made from a disc without weld.

Manufacturing standards

These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.

For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.

FG6L700X3

Data sheet

Type
Klopper head (DIN-28011)
Manufacturing standards
DIN28011
Outer diameter
Ø 700 mm
Nominal Thickness
3 mm
Mini Thickness
2.3 mm
Straight flange height
25 mm
Bevel
D1
Material
316 L - 1.4404