Fond GRC D.EXT 800 EP.4mm Dép. 316 l NFE81102
  • Fond GRC D.EXT 800 EP.4mm Dép. 316 l NFE81102
  • Fond GRC D.EXT 800 EP.4mm Dép. 316 l NFE81102
  • Fond GRC D.EXT 800 EP.4mm Dép. 316 l NFE81102
  • Fond GRC D.EXT 800 EP.4mm Dép. 316 l NFE81102

DIN28011- 316L- 800mm diameter 4mm thick

€485.72
Tax excluded

316L stainless steel Dished head 800 mm diameter

Torispherical (klopper) head in 316L stainless steel, in compliance with DIN28011 standard.

These heads can be used for stainless steel tank manufacturing.

All dimensions are in millimeters.

Quantity

 

Payment secured

 

Fast delivery

 

decreasing prices

You might also like

  •  Ref : VRS6L800X4
  • 316 L - 1.4404
VIROLE TEST
Starting from €722.10 HT

Features of stainless steel tank ends

This 316L stainless steel end is manufactured in accordance with DIN28011.

The dish radius is 800mm. 

The knuckle radius is 80mm.

The straight flange height is 25mm.

Dished head forming processes

Dished heads are manufactured by cold processes, spinning or press-forming.

All our dished stainless steel are supplied without grease. No heat treatment is performed after forming.

This dished head is made from a disc without weld.

Manufacturing standards

These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.

For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.

316L - 1.4404 stainless steel

This dished head is made from a sheet of stainless steel 316L - 1.4404 with a 4 mm nominal thickness.

The 316 stainless steel contains molybdenum, which gives it a high resistance to corrosion (especially chlorine and sea water).

The origin of stainless steel sheets (selected for the manufacture of funds) is European, and each manufacturer is ISO-9001 certified.

FG6L800X4

Data sheet

Type
Klopper head (DIN-28011)
Manufacturing standards
DIN28011
Outer diameter
Ø 800 mm
Nominal Thickness
4 mm
Mini Thickness
3.4 mm
Straight flange height
25 mm
Bevel
D1
Material
316 L - 1.4404