-
Material
-
-
-
Stainless steel grades
-
-
-
-
Carbon steel grades
-
-
-
External diameter
-
-
Thickness
-
-
Choose your thickness
-
-
-
-
Shells
-
-
Choose the material of your shell
-
-
-
-
-
Accessories
-
DIN28011- 316L- 1000mm diameter 5mm thick
New product
316L stainless steel Dished head 1000 mm diameter
Torispherical (klopper) head in 316L stainless steel, in compliance with DIN28011 standard.
These heads can be used for stainless steel tank manufacturing.
All dimensions are in millimeters.
- > Type : Klopper head (DIN-28011)
- > Manufacturing standards: DIN28011
- > Outer diameter: Ø 1000 mm
- > Nominal Thickness: 5 mm
- > Mini Thickness: 4.25 mm
- > Straight flange height: 40 mm
- > Bevel: D1
- > Material: 316 L - 1.4404
- More info
Product assets
Features of stainless steel tank ends
This 316L stainless steel end is manufactured in accordance with DIN28011.
The dish radius is 1000mm.
The knuckle radius is 100mm.
The straight flange height is 40mm.
Dished head forming processes
Dished heads are manufactured by cold processes, spinning or press-forming.
All our dished stainless steel are supplied without grease. No heat treatment is performed after forming.
This dished head is made from a disc without weld.
316L - 1.4404 stainless steel
This dished head is made from a sheet of stainless steel 316L - 1.4404 in 5 mm thickness.
The 316 stainless steel contains molybdenum, which gives it a high resistance to corrosion (especially chlorine and sea water).
The origin of stainless steel sheets (selected for the manufacture of heads) is European, and each manufacturer is ISO-9001 certified.
Manufacturing standards
These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
Accessories
Discoversimilar products
-
Dished heads in P265GH steel - diameter 1400mm DIN28011 tank heads and bottoms, made up from 6 mm thick P265GH A42CP steel sheets. This torispherical head is perfect for making full pressure vessels. All dimensions are in millimeters.
Ø 350 mm / 3 mm -
304L stainless steel Dished end 400 mm diameter Torispherical (klopper) end in 304L stainless steel, in compliance with DIN28011 standard. These ends can be used for stainless steel tank manufacturing. All dimensions are in millimeters.
Ø 400 mm / 3 mm -
304L torispherical head 450 mm diameter Torispherical (klopper) head in 304L stainless steel, in compliance with DIN28011 standard. These heads can be used for stainless steel tank manufacturing. All dimensions are in millimeters.
Ø 450 mm / 3 mm -
304L stainless steel dished head 500 mm diameter Torispherical (klopper) heads in 304L stainless steel, in compliance with DIN28011 standard. These heads can be used for stainless steel tank manufacturing. All dimensions are in millimeters.
Ø 500 mm / 3 mm
