GRC D.EXT 1250 ép 5 mm dép S235JR
  • GRC D.EXT 1250 ép 5 mm dép S235JR
  • GRC D.EXT 1250 ép 5 mm dép S235JR
  • GRC D.EXT 1250 ép 5 mm dép S235JR
  • GRC D.EXT 1250 ép 5 mm dép S235JR
  • GRC D.EXT 1250 ép 5 mm dép S235JR

DIN28011- S235JR- 1250mm diameter 5mm thick

€484.34
Tax excluded

DIN 28011 Dished end diam 1250 in steel S235JRG2

DIN28011 tank head or bottom, formed from 5 mm thick S235JRG2 - E24-2 steel sheets.

This dished end is suitable for welding.

Note that all dimensions are in millimeters.

Quantity

 

Payment secured

 

Fast delivery

 

decreasing prices

Torispherical head material

This torispherical tank head is formed from 5 mm thick S235JRG2 - E24-2 steel sheets.

S235JR steel is a steel perfectly suitable for welding.

The origin of our steel sheets (selected for the manufacture of funds) is European, each manufacturer is ISO-9001 certified. We can also provide you the Certificates of in-factory product control for your dished head during your order.

Characteristics of carbon steel tank head

This carbon steel end is manufactured in accordance with DIN28011.

The dish radius is 1250mm. 

The knuckle radius is 125mm.

The straight flange height is 40mm. 

S235JR steel ends standards

These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.

For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.

FG235JR1250X5

Data sheet

Type
Klopper head (DIN-28011)
Manufacturing standards
DIN28011
Outer diameter
Ø 1250 mm
Nominal Thickness
5 mm
Mini Thickness
4.25 mm
Straight flange height
40 mm
Bevel
D1
Material
S235JRG2 (E24-2)