Fond GRC D.EXT 1300 EP.6mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1300 EP.6mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1300 EP.6mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1300 EP.6mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1300 EP.6mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1300 EP.6mm Dép. 304 L NFE81102

DIN28011- 304L- 1300mm diameter 6mm thick

€990.90
Tax excluded

Klopper head in 304L - 1300 mm diameter 6mm thickness 

Dished head with a diameter of 1300 mm, with a 6mm nominal thickness, in 304L stainless steel, which complies with DIN28011 standard.

This head is ideal for stainless steel pressure vessel manufacturing.

Info: dimensions are in millimeters.

Quantity

 

Payment secured

 

Fast delivery

 

decreasing prices

You might also like

  •  Ref : VRS4L1300X6
  • 304 L - 1.4307
VIROLE TEST
Starting from €488.04 HT

DIN28011 heads forming processes

Dished heads are manufactured by cold processes, spinning or press-forming.

All our dished stainless steel are supplied without grease. No heat treatment is performed after forming.

Manufacturing standards of stainless steel heads

These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.

For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.

Features of this stainless steel tank ends

This 304L stainless steel end is manufactured in accordance with DIN28011.

The dish radius is 1300mm. 

The knuckle radius is 130mm.

The straight flange height is 30mm.

Besides, Distrifond is able to provide you material certificate 3.1 according to EN 10204 with EN 10-0287 and ASTM A240 for each of your dished ends.

FG4L1300X6

Data sheet

Type
Klopper head (DIN-28011)
Manufacturing standards
DIN28011
Outer diameter
Ø 1300 mm
Nominal Thickness
6 mm
Mini Thickness
5.1 mm
Straight flange height
35
Bevel
D1
Material
304 L - 1.4307