GRC D.EXT 300 ép 3 mm dép P265GH
  • GRC D.EXT 300 ép 3 mm dép P265GH
  • GRC D.EXT 300 ép 3 mm dép P265GH
  • GRC D.EXT 300 ép 3 mm dép P265GH
  • GRC D.EXT 300 ép 3 mm dép P265GH
  • GRC D.EXT 300 ép 3 mm dép P265GH

DIN28011- P265GH - 300mm diameter 3mm thick

€83.25
Tax excluded

DIN 28011 Dished head diameter 300 in P265GH steel

DIN28011 tank heads and bottoms, formed from  3 mm thick P265GH A42CP steel sheets.

This dished head is suitable for welding.

All dimensions are in millimeters.

Quantity

 

Payment secured

 

Fast delivery

 

decreasing prices

DIN28011 Torispherical end material

This torispherical tank head is formed from 3 mm thick P265GH A42CP steel sheets.

P265GH steel is a steel perfectly suitable for manufacturing pressure vessel.

Choosing steel sheets

The steel sheets are carefully chosen and our partners in Europe are French manufacturers who are ISO-9001 certified.

We are also able to give you the Certificates of in-factory product control for your dished head during your order.

P265GH A42CP tank head characteristics

This P265GH A42CP tank head is manufactured in accordance with DIN28011.

The dish radius is 300mm. 

The knuckle radius is 30mm.

The straight flange height is 25mm.

P265GH steel torispherical ends standards

The dished ends we propose you are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.

For a torispherical end ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.

FG265GH300X3

Data sheet

Type
Klopper head (DIN-28011)
Manufacturing standards
DIN28011
Outer diameter
Ø 300 mm
Nominal Thickness
3 mm
Mini Thickness
2.3 mm
Straight flange height
25 mm
Bevel
D1
Material
P265GH (A42CP)