DIN28011- P265GH- 650mm diameter 6mm thick

Steel tank head with a 650mm diameter

This P265GH dished head is manufactured in accordance with DIN28011.

The dish radius is 650mm. 

The knuckle radius is 65mm.

The straight flange height is 40mm.

Carbon Steel P265GH head forming

These dished ends are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.

For a tank head ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.

We took care to specify thicknesses listed above in the features, with other important data.

Fast delivery of P265GH steel ends

Thanks to the direct relationship with manufacturing partners, we want to guarantee a short circuit without any intermediary. Thus it enables the control of raw materials while also ensures a high level of quality at an affordable price. We guarantee the quality of our dished heads. And for all professionals, this means bottoms delivered as quickly as possible, which is more than appropriate for urgent deadlines.