DIN28011- 304L- 950mm diameter 3mm thick
304L stainless steel 950 mm diameter DIN28011 head
Torispherical (klopper) head in 304L stainless steel, in compliance with DIN28011 standard.
These heads can be used for stainless steel tank manufacturing.
All dimensions are in millimeters.
You might also like
Customers who bought this product also bought:
Features of 304L tank ends
This 304L stainless steel end is manufactured in accordance with DIN28011.
The dish radius is 950mm.
The knuckle radius is 95mm.
The straight flange height is 25mm.
304L 1.4307 stainless steel
This dished head is made from stainless steel sheet 304L - 1.4307 in 3 mm thickness.
The 304L is the most popular stainless steel. Also called 1.4307, it is a food-compatible stainless steel.
The origin of stainless steel sheets (used for the manufacture of heads) is European and our partners are ISO9001 certified manufacturers from France.
304L Dished head forming processes
Dished heads are manufactured by cold processes, spinning or press-forming.
All our dished stainless steel are supplied without grease. No heat treatment is performed after forming.
The 950mm diameter bottom 3mm thickness is made from a disc without weld.
Dished heads Fabrication standards
These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
- Klopper head (DIN-28011)
- Manufacturing standards
- Outer diameter
- Ø 950 mm
- Nominal Thickness
- 3 mm
- Mini Thickness
- 2.3 mm
- Straight flange height
- 25 mm
- 304 L - 1.4307