DIN28011- 304L- 650mm diameter 3mm thick
304L stainless steel tank end 650 mm diameter
Torispherical (klopper) head or bottom in 304L stainless steel, in compliance with DIN28011 standard.
These heads are perfect for stainless steel tank manufacturing.
All dimensions are in millimeters.
Customers who bought this product also bought:
Stainless steel tank ends details
This 304L stainless steel end is manufactured in accordance with DIN28011.
The dish radius is 650mm.
The knuckle radius is 65mm.
The straight flange height is 25mm.
Manufacturing standards of torispherical heads
These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
Dished heads forming process
Dished heads are manufactured by cold processes, spinning or press-forming.
All our dished stainless steel are supplied without grease. No heat treatment is performed after forming.
The 650mm diameter and 3mm thickness dished head is made from a disc without weld.
- Klopper head (DIN-28011)
- Manufacturing standards
- Outer diameter
- Ø 650 mm
- Nominal Thickness
- 3 mm
- Mini Thickness
- 2.3 mm
- Straight flange height
- 25 mm
- 316 L - 1.4404