DIN28011- 304L- 1300mm diameter 5mm thick
Torispherical head in 304L - 1300 mm diameter 5mm thickness
Dished head with a diameter of 1300 mm, in 304L stainless steel, which complies with DIN28011 standard. With a 5mm nominal thickness, is ideal for stainless steel tank manufacturing.
Info: dimensions are in millimeters.
You might also like
Manufacturing standards of stainless steel heads
These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
Features of this klopper ends
This 304L stainless steel end is manufactured in accordance with DIN28011.
The dish radius is 1300mm.
The knuckle radius is 130mm.
The straight flange height is 30mm.
Moreover, Distrifond is able to provide you material certificate 3.1 according to EN 10204 with EN 10-0287 and ASTM A240 for each of your dished ends.
304L 1.4307 stainless steel dished head
This dished head is made from stainless steel sheet 304L - 1.4307 in 5 mm thickness.
The 304L is the most popular stainless steel. Also called 1.4307, it is a food-compatible stainless steel.
This dished end is ideal to build a complete stainless steel tank. Our stainless steel heads are perfectly suitable for all pressure vessels.
- Klopper head (DIN-28011)
- Manufacturing standards
- Outer diameter
- Ø 1300 mm
- Nominal Thickness
- 5 mm
- Mini Thickness
- 4.25 mm
- Straight flange height
- 304 L - 1.4307