DIN28011- 304L- 1200mm diameter 6mm thick
Klopper head in 304L - 1200 mm diameter 6mm thickness
Dished head with a diameter of 1200 mm, with a 6mm nominal thickness, in 304L stainless steel, which complies with DIN28011 standard.
This head is ideal for stainless steel pressure vessel manufacturing.
Info: dimensions are in millimeters.
You might also like
Short circuit distribution of our tank heads
Thanks to the direct relationship with our manufacturing partners, we want to guarantee a short circuit without any intermediary. This allows the control of raw materials but also ensures a high level of quality at an affordable price. For our customers, this guarantees the quality of our dished ends which is perfect in case of urgent deadline.
DIN28011 heads forming processes
Dished heads are manufactured by cold processes, spinning or press-forming.
All our dished stainless steel are supplied without grease. No heat treatment is performed after forming.
Stainless steel tank ends
This 304L stainless steel end is manufactured in accordance with DIN28011.
The dish radius is 1200mm.
The knuckle radius is 120mm.
The straight flange height is 40mm.
Moreover, Distrifond is able to provide you material certificate 3.1 according to EN 10204 with EN 10-0287 and ASTM A240 for each of your dished ends.
Manufacturing standards of stainless steel heads
These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
- Klopper head (DIN-28011)
- Manufacturing standards
- Outer diameter
- Ø 1200 mm
- Nominal Thickness
- 6 mm
- Mini Thickness
- 5.1 mm
- Straight flange height
- 40 mm
- 304 L - 1.4307