Fond GRC D.EXT 1100 EP.8mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1100 EP.8mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1100 EP.8mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1100 EP.8mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1100 EP.8mm Dép. 304 L NFE81102
  • Fond GRC D.EXT 1100 EP.8mm Dép. 304 L NFE81102

DIN28011- 304L- 1100mm diameter 8mm thick

€1,061.98
Tax excluded

304L stainless steel head - 1100 mm diameter 8mm thickness 

Klopper head with a diameter of 1100 mm, with a 8 mm nominal thickness, in 304L stainless steel, which complies with DIN28011 standard.

This head is ideal for stainless steel pressure vessel manufacturing.

Info: dimensions are in millimeters.

Quantity

 

Payment secured

 

Fast delivery

 

decreasing prices

You might also like

  •  Ref : VRS4L1100X8
  • 304 L - 1.4307
VIROLE TEST
Starting from €488.04 HT

Manufacturing standards of Klopper heads

These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.

For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.

Tank heads fast delivery

Thanks to the direct relationship with our manufacturing partners, we want to guarantee a short circuit without any intermediary. This allows the control of raw materials but also ensures a high level of quality at an affordable price. For our customers, this guarantees the quality of our dished ends which is perfect in case of urgent deadline.

Klopper heads forming processes

Dished heads are manufactured by cold processes, spinning or press-forming.

All our dished stainless steel are supplied without grease. No heat treatment is performed after forming.

Stainless steel tank ends characteristics

This 304L stainless steel end is manufactured in accordance with DIN28011.

The dish radius is 1100mm. 

The knuckle radius is 110mm.

The straight flange height is 50mm.

Moreover, Distrifond is able to provide you material certificate 3.1 according to EN 10204 with EN 10-0287 and ASTM A240 for each of your dished ends.

FG4L1100X8

Data sheet

Type
Klopper head (DIN-28011)
Manufacturing standards
DIN28011
Outer diameter
Ø 1100 mm
Nominal Thickness
8 mm
Mini Thickness
6.8 mm
Straight flange height
50 mm
Bevel
D1
Material
304 L - 1.4307