DIN28011- 316L- 500mm diameter 3mm thick
316L stainless steel Dished head 500 mm diameter
Torispherical (klopper) head in 316L stainless steel, in compliance with DIN28011 standard.
These heads can be used for stainless steel tank manufacturing.
All dimensions are in millimeters.
You might also like
Customers who bought this product also bought:
Features of stainless steel tank ends
This 316L stainless steel end is manufactured in accordance with DIN28011.
The dish radius is 500mm.
The knuckle radius is 50mm.
The straight flange height is 25mm.
These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
316L - 1.4404 stainless steel
This dished head is made from a sheet of stainless steel 316L - 1.4404 in 3 mm thickness.
The 316 stainless steel contains molybdenum, which gives it a high resistance to corrosion (especially chlorine and sea water).
The origin of stainless steel sheets (selected for the manufacture of funds) is European, and each manufacturer is ISO-9001 certified.
- Klopper head (DIN-28011)
- Manufacturing standards
- Outer diameter
- Ø 500 mm
- Nominal Thickness
- 3 mm
- Mini Thickness
- 2.3 mm
- Straight flange height
- 25 mm
- 316 L - 1.4404