DIN28011- 316L- 1600mm diameter 6mm thick
316L stainless steel Klopper head 1600 mm diameter
Torispherical (klopper) head in 316L stainless steel, in compliance with DIN28011 standard.
These heads can be used for stainless steel tank manufacturing.
All dimensions are in millimeters.
You might also like
Features of 316L Klopper heads
This 316L stainless steel end is manufactured in accordance with DIN28011.
The dish radius is 1600mm.
The knuckle radius is 160mm.
The straight flange height is 40mm.
Dished head thicknesses
Dished heads are manufactured by cold processes, spinning or press-forming.
All our dished stainless steel are supplied without grease. No heat treatment is performed after forming.
This dished head is made from a disc without weld.
These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
- Klopper head (DIN-28011)
- Manufacturing standards
- Outer diameter
- Ø 1600 mm
- Nominal Thickness
- 6 mm
- Mini Thickness
- 5.1 mm
- Straight flange height
- 40 mm
- 316 L - 1.4404