Rolled shell - 316L- 1200mm diameter 6mm thick
Rolled shell in 316L stainless steel 1200 mm diameter 6mm thickness
The shell is supplied with an automatic soldering (Plasma-TIG/GTAW). There is no radio control on the weld.
This shell is made from a sheet of stainless steel 316L - 1.4404 in 6 mm thickness.
All dimensions are in millimeters.
A complete service, from the shell to the ends
The shells supplied by Distrifond are rolled and welded, and then gabarized. They have raw welds without radio control. The welds are made following the rules of the art according to the determined operating procedures. If you wish to carry out checks on the weld, any reworks will be at your expense.
Thus, Distrifond can provide you a shell, the dished ends, in order to get the full stainless pressure vessel that you desire.
Tailor-made stainless steel shell
You are on the page of the shell adapted to the diameter of your dished heads. Then you have to choose the length of your stainless steel shell according to the desired dimensions of the future pressure vessel. Thus, you will get the shell perfectly adapted to your project of construction of pressure.
However, since the shells are tailored, you will understand that the delivery time will be longer than for simple dished heads in stock, since there is a manufacturing phase to be taken into account.
316L - 1.4404 stainless steel
The 316 stainless steel contains molybdenum, which gives it a high resistance to corrosion (especially chlorine and sea water).
The origin of stainless steel sheets (selected for the manufacture of heads) is European, and each manufacturer is ISO-9001 certified.
- Outer diameter
- Ø 1200 mm
- Nominal Thickness
- 6 mm
- 316 L - 1.4404