GRC D.EXT 400 ép 3 mm dép P265GH
  • GRC D.EXT 400 ép 3 mm dép P265GH
  • GRC D.EXT 400 ép 3 mm dép P265GH
  • GRC D.EXT 400 ép 3 mm dép P265GH
  • GRC D.EXT 400 ép 3 mm dép P265GH
  • GRC D.EXT 400 ép 3 mm dép P265GH

DIN28011- P265GH- 400mm diameter 3mm thick

€90.17
Tax excluded

DIN 28011 Dished end diam 400 in P265GH steel

DIN28011 tank heads and bottoms, formed from 3 mm thick P265GH A42CP steel sheets.

This dished end is greatly worthy for welding.

Please note that all dimensions are in millimeters.

Quantity

 

Payment secured

 

Fast delivery

 

decreasing prices

P265GH steel torispherical head and bottom standards

These dished ends are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.

For a tank head ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.

P265GH torispherical head features

This P265GH tank head is manufactured in accordance with DIN28011.

The dish radius is 400mm. 

The knuckle radius is 40mm.

The straight flange height is 25mm.

DIN28011 Torispherical end material

This torispherical tank head is formed from 3 mm thick P265GH A42CP steel sheets.

P265GH steel is a steel perfectly suitable for manufacturing pressure vessel.

Choosing carbon steel sheets

The steel sheets are carefully chosen and our partners in Europe are French manufacturers who are ISO-9001 certified.

We are also able to give you the Certificates of in-factory product control for your dished head during your order.

FG265GH400X3

Data sheet

Type
Klopper head (DIN-28011)
Manufacturing standards
DIN28011
Outer diameter
Ø 400 mm
Nominal Thickness
3 mm
Mini Thickness
2.3 mm
Straight flange height
25 mm
Bevel
D1
Material
P265GH (A42CP)