DIN28011- S235JR- 1000mm diameter 4mm thick
DIN 28011 Dished end diam 1000 in steel S235JRG2
DIN28011 tank head or bottom, formed from 4 mm thick S235JRG2 - E24-2 steel sheets.
This dished end is suitable for welding.
Note that all dimensions are in millimeters.
Customers who bought this product also bought:
Torispherical head material
This torispherical tank head is formed from 4 mm thick S235JRG2 - E24-2 steel sheets.
S235JR steel is a steel perfectly suitable for welding.
The origin of our steel sheets (selected for the manufacture of funds) is European, each manufacturer is ISO-9001 certified. We can also provide you the Certificates of in-factory product control for your dished head during your order.
S235JR steel ends standards
These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
Characteristics of carbon steel tank head
This carbon steel end is manufactured in accordance with DIN28011.
The dish radius is 1000mm.
The knuckle radius is 100mm.
The straight flange height is 25mm.
- Klopper head (DIN-28011)
- Manufacturing standards
- Outer diameter
- Ø 1000 mm
- Nominal Thickness
- 4 mm
- Mini Thickness
- 3.4 mm
- Straight flange height
- 25 mm
- S235JRG2 (E24-2)