DIN28011- P265GH - 700mm diameter 3mm thick
DIN 28011 Dished head diam 700 in P265GH steel
DIN28011 pressure vessel heads and bottoms, formed from 3 mm thick P265GH A42CP steel sheets.
This torispherical end is suitable for welding.
All dimensions are in millimeters.
Customers who bought this product also bought:
P265GH steel dished heads standards
This dished head is manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a pressure vessel head ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
P265GH A42CP tank head Features
This P265GH tank head is manufactured in accordance with DIN28011.
The dish radius is 700mm.
The knuckle radius is 70mm.
The straight flange height is 25mm.
DIN28011 Torispherical end material
This torispherical tank head is formed from 3 mm thick P265GH A42CP steel sheets.
P265GH steel is a steel perfectly suitable for manufacturing pressure vessel.
Steel sheets choice
The steel sheets are carefully chosen and our partners in Europe are French manufacturers who are ISO-9001 certified.
We are also able to give you the Certificates of in-factory product control for your dished head during your order.
- Klopper head (DIN-28011)
- Manufacturing standards
- Outer diameter
- Ø 700 mm
- Nominal Thickness
- 3 mm
- Mini Thickness
- 2.3 mm
- Straight flange height
- 25 mm
- P265GH (A42CP)