GRC D.EXT 450 ép 3 mm dép S235JR
  • GRC D.EXT 450 ép 3 mm dép S235JR
  • GRC D.EXT 450 ép 3 mm dép S235JR
  • GRC D.EXT 450 ép 3 mm dép S235JR
  • GRC D.EXT 450 ép 3 mm dép S235JR
  • GRC D.EXT 450 ép 3 mm dép S235JR

DIN28011- S235JR- 450mm diameter 3mm thick

Tax excluded

DIN 28011 Dished end diam 450 in steel S235JRG2

DIN28011 tank head or bottom, formed from  3 mm thick S235JRG2 - E24-2 steel sheets.

This dished end is perfect for welding.

Note that all dimensions are in millimeters.



Payment secured


Fast delivery


decreasing prices

S235JR steel heads standards

These bottoms are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.

For a tank bottom ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.

Torispherical head material

This torispherical tank head is formed from 3 mm thick S235JRG2 - E24-2 steel sheets.

S235JR steel is a steel perfectly suitable for welding.

The origin of our steel sheets (selected for the manufacture of funds) is European, each manufacturer is ISO-9001 certified. We can also provide you the Certificates of in-factory product control for your dished head during your order.

Features of carbon steel tank end

This carbon steel end are manufactured in accordance with DIN28011.

The dish radius is 450mm. 

The knuckle radius is 45mm.

The straight flange height is 25mm.


Data sheet

Klopper head (DIN-28011)
Manufacturing standards
Outer diameter
Ø 450 mm
Nominal Thickness
3 mm
Mini Thickness
2.3 mm
Straight flange height
25 mm
S235JRG2 (E24-2)