DIN28011- P265GH - 500mm diameter 3mm thick
DIN 28011 torispherical head diam 500 in P265GH steel
DIN28011 tank heads and bottoms, formed from 3 mm thick P265GH - A42CP steel sheets.
This torispherical head is suitable for welding.
Note that all dimensions are in millimeters.
Customers who bought this product also bought:
P265GH A42CP tank head and bottom characteristics
This P265GH tank head is manufactured in accordance with DIN28011.
The dish radius is 500mm.
The knuckle radius is 50mm.
The straight flange height is 25mm.
P265GH steel torispherical end standards
These dished ends are manufactured in accordance with DIN28011. Manufacturing tolerances strictly follow the DIN28011, highlighting the tolerances on its height, its thickness after forming.
For a tank head ordered at a nominal thickness (also called starting thickness) E, the actual thickness measured after forming may differ from E, not only because of the tolerances on the thickness of the sheet, but also because of changes caused by the forming process.
DIN28011 dished end material
This torispherical tank head is formed from 3 mm thick P265GH A42CP steel sheets.
P265GH steel is a steel perfectly suitable for manufacturing pressure vessel.
Choosing steel sheets
The steel sheets are carefully chosen and our partners in Europe are French manufacturers who are ISO-9001 certified.
We are also able to give you the Certificates of in-factory product control for your dished head during your order.
- Klopper head (DIN-28011)
- Manufacturing standards
- Outer diameter
- Ø 500 mm
- Nominal Thickness
- 3 mm
- Mini Thickness
- 2.3 mm
- Straight flange height
- 25 mm
- P265GH (A42CP)